PA66 FG42A NC010美國杜邦Zytel®聚酰胺66尼龍塑料（18024445500）

General information Value Unit Test Standard
Resin Identification PA66 - -
Part Marking Code >PA66< - ISO 11469
Rheological properties dry / cond Unit Test Standard
Viscosity number 280 / * cm³/g ISO 307, 1157, 1628
Moulding shrinkage, parallel 1.4 / * % ISO 294-4, 2577
Moulding shrinkage, normal 1.4 / * % ISO 294-4, 2577
Mechanical properties dry / cond Unit Test Standard
Tensile Modulus 3100 / 1300 MPa ISO 527-1/-2
Yield stress 83 / 55 MPa ISO 527-1/-2
Yield strain 4.4 / 27 % ISO 527-1/-2
Nominal strain at break >50 / >50 % ISO 527-1/-2
Flexural Modulus 2800 / 1070 MPa ISO 178
Charpy impact strength 　 　 ISO 179/1eU
23°C N / N kJ/m² 　
-30°C N / N kJ/m² 　
Charpy notched impact strength 　 　 ISO 179/1eA
23°C 6 / 20 kJ/m² 　
-30°C 6 / 4 kJ/m² 　
Izod notched impact strength 　 　 ISO 180/1A
23°C 6 / 23 kJ/m² 　
-30°C 7 / 6 kJ/m² 　
Izod impact strength 　 　 ISO 180/1U
23°C N/N kJ/m² 　
-30°C N/N kJ/m² 　
Thermal properties dry/cond Unit Test Standard
Melting temperature, 10°C/min 262/* °C ISO 11357-1/-3
Glass transition temperature, 10°C/min 70/- °C ISO 11357-1/-2
Temp. of deflection under load 　 　 ISO 75-1/-2
1.8 MPa 70 / * °C 　
0.45 MPa 200 / * °C 　
Vicat softening temperature, 50°C/h, 50N 244 / * °C ISO 306
Coeff. of linear therm. expansion, parallel 100 / * E-6/K ISO 11359-1/-2
Coeff. of linear therm. expansion, normal 100 / * E-6/K ISO 11359-1/-2
Thermal conductivity of melt 0.16 W/(m K) -
Spec. heat capacity of melt 2790 J/(kg K) -
Flammability dry / cond Unit Test Standard
Burning Behav. at 1.5mm nom. thickn. HB / * class IEC 60695-11-10
Thickness tested 1.5 / * mm IEC 60695-11-10
UL recognition UL / * - -
Burning Behav. at thickness h V-2 / * class IEC 60695-11-10
Thickness tested 3 / * mm IEC 60695-11-10
UL recognition UL / * - -
Oxygen index 28 / * % ISO 4589-1/-2
Relative permittivity 　 　 IEC 60250
100Hz 4.3 / 10 - 　
1MHz 3.6 / 4.2 - 　
Dissipation factor 　 　 IEC 60250
100Hz 150 / 2000 E-4 　
1MHz 150 / 750 E-4 　
Volume resistivity 1E13 / 1E11 Ohm*m IEC 60093
Electric strength 31 / - kV/mm IEC 60243-1
Other properties dry / cond Unit Test Standard
Humidity absorption, 2mm 2.6 / * % Sim. to ISO 62
Water absorption, 2mm 8.5 / * % Sim. to ISO 62
Density 1140 / - kg/m³ ISO 1183
Density of melt 1010　kg/m³ -