無錫走廊樓梯地坪價格是多少 400-0709-910(請撥打400-0709-910電話，永堅地坪公司)

土地面或金鋼砂硬化劑地面，
**表面的油污、涂料和松散結構等影響滲透的物質，然后徹底清掃地面。
3、對過于干燥的舊地面，使用清潔水充分潤濕混凝土表面。
4、使用混凝土密封固化劑干粉劑按1:5--1:10比例兌水均勻潑灑在地面上，期間必須使各面都有均勻浸泡到材料。
5、當氣溫較高時，表面的硬化劑由于水份蒸發的原因很快變粘稠，可噴涂少量水稀釋變稠的硬化劑,但用量不宜過多。
6、完成上述步驟下一步進行打磨，可使用50#到3000#水磨片循環打磨，每次打磨并根據現場情況浸泡材料。
7、養護：干燥24小時后地面可步行開放，正常使用應養護七天后再投入使用。滲透的硬化劑**成分逐漸與水泥反應，經常使用濕拖把清潔地面能促進滲透到混凝土內部的凝膠繼續反應，行駛輕型車輛。
（5）地面強度完全達到70-90N/mm2需在28天以上。
（6）在28天以內，應避免金屬物體直接撞擊地面，也不可在地面上拖移，以避免刮出劃痕。 四、地面建造工程
不同行業對地面有不同的使用要求，可以綜合考慮地面的經濟性和適用性為不同行業提供不同的地面設計建造方案。
基層混凝土澆筑質量是超硬混凝土地面的質量基礎，混凝土的準備和施工可根據設計院的設計要求來定，由土建施工單位進行�；炷�土地面澆筑時平整度一定要予以保障，鋰基滲透性液體硬化劑/封地劑材料系統并不增加地面厚度，無法以此來控制地面的平整度。 現代化的工廠對于地坪的要求是非常高的，例如選擇普通的水泥地坪，工作中產生的揚塵不僅有害于員工的身體健康，亦會造成對精密儀器的損害，甚至影響產品質量水平。因此，幾乎所有的現代化工廠都會選擇不同的環氧地坪涂裝系統以適應其不同環境的需要。尚地環氧地坪漆廠針對上述需求開發了專用于現代化廠房室內地面的環氧平涂地坪系統，該系統擁有較高的附著力和附載性，并兼具強韌耐磨平整光潔及成本經濟等優點。
環氧平涂地坪的適用范圍：
環氧平涂地坪適用于無重載的工業廠房，如電子電器、機械、化工、醫藥、紡織、服裝、煙草等行業，倉庫、超市、停車場等其他特殊場所，所有的水泥或水磨石地面。有凈化要求的無塵墻面天花板的涂飾等。
環氧平涂地坪性能特點：
環氧平涂地坪外觀平整亮麗色彩多樣，便于清潔維護方便。附著力強柔韌性好抗沖擊。優異的耐磨性。環氧地坪施工快捷、成本經濟。
Land surface or emery hardener ground,
Clear penetration of substances affect surface oil, paint and loose structure, then thoroughly clean the floor.
3, the old ground is too dry, use clean water to fully wet the concrete surface.
4, use concrete sealer dry powder of 1: 5-1: 10 ratio watered evenly sprinkle on the ground, during the respective surface must have a uniform soaked into the material.
5, when the temperature is high, the surface of the hardener quickly due to water evaporation becomes sticky, spray a small amount of water can dilute the thickened hardener, but the amount should not be excessive.
6, the completion of the grinding step Next, use 50 # to 3000 # sheet mill cycle grinding, polishing each and immersed material according to the site.
7, conservation: dry for 24 hours after the ground is within walking distance open, normal use should conserve seven days and then put into use. Hardener penetration of the active ingredient gradually and cement reaction, often with a damp mop to clean the floor can promote penetration into the concrete inside the gel continue to react, with light vehicles.
(5) Ground strength fully meet 70-90N / mm2 need more than 28 days.
(6) Within 28 days, they should avoid metal objects directly hit the ground, and do not drag on the ground, to avoid scraped scratches. Fourth, the ground construction
Different industries have different ground requirements may take into consideration economic and applicability of the ground floor designed and built to provide different solutions for different industries.
Quality is the quality of the grass-roots foundation concrete pouring the concrete floor of superhard, preparation and construction of the concrete can be designed according to the requirements of a given Institute, carried out by the civil construction units. Flatness must be safeguards when pouring the concrete floor, lithium-based liquid permeability hardener / manor binder material system does not increase the thickness of the ground, unable to control the flatness of this ground. The modern factory for flooring requirements are very high, for example, choose an ordinary cement floor, dust the work produced not only harmful to the health of employees, may also cause damage to precision instruments, and even affect the quality of products. Thus, almost all of the modern factory would choose a different epoxy floor coating system to suit their needs of different environments. Still be demand for the above epoxy floor paint factory dedicated to the development of modern factories epoxy floor flat interior floor coating system, which has a high adhesion and attached sex, and both toughness and wear flat and smooth costs and economic advantages.
Epoxy floor coating level of Scope:
    Epoxy floor coating level applicable to other special places without overloading industrial plants, such as electronic appliances, machinery, chemicals, pharmaceuticals, textiles, clothing, tobacco and other industries, warehouses, supermarkets, car parks, etc., all of cement or terrazzo floor . There the purification required finishing clean walls ceilings and the like.
Tu Ping epoxy floor Features:
    Epoxy floor coating flat smooth appearance bright color variety, easy to clean and easy to maintain. Flexibility, impact resistance and good adhesion. Excellent wear resistance. Epoxy construction speed, cost economy.

資訊來源：<聯系電話:400-0709-910>